Meaning
Tensile stress acting perpendicular to the interface of a bonded joint tends to pull the overlapping layers apart in a peeling motion. The presence of peel stress is highly detrimental to the longevity of laminated structures and microelectronic assemblies. Engineers calculate this localized force to predict the initiation of adhesive failure or delamination.
Stress Generation
The concentration of this stress occurs primarily at the outer edges of the joint, where the adhesive is most vulnerable. Under mechanical or thermal loading, the stiffness mismatch between the bonded plates creates a bending moment. This moment forces the plates apart, focusing a high tensile load on the very tip of the bond line.
Since adhesives are generally much weaker in tension than in shear, this perpendicular stress is the primary driver of joint failure.
Test Standard
Testing laboratories measure this behavior by pulling one flexible layer from another at a fixed angle and speed. These standardized tests verify that the adhesive formulation can withstand handling forces during manufacturing and assembly. This data is critical for choosing correct surface preparation methods.
Mitigation Design
Designing tapered joint edges and increasing adhesive thickness are effective strategies for distributing this localized load. These modifications prevent the concentration of forces at the bond termination.