Meaning
A destructive material testing method provides cross-sectional views of printed circuit board layers to verify manufacturing conformity. Through this procedure, micro-sectioning analysis exposes internal microvias, plating thicknesses, and multi-layer alignments. Standard testing protocols use this technique to locate structural faults and voids in copper plating.
This methodology detects hidden defects that escape non-destructive automated inspection.
Specimen Preparation
Extraction of the sample board requires mechanical cutting to separate the coupon from the production panel. Technicians encapsulate the coupon in epoxy resin to prevent surface damage during subsequent grinding steps. Progression through abrasive silicon carbide paper grits exposes the target measurement plane.
Polishing with fine alumina compounds removes surface scratches to reveal the copper grain boundaries.
Defect Detection
Metallurgical microscopy allows the examiner to measure layer dimensions and assess copper plating integrity. Inspectors utilize high-magnification lenses to discover knee cracks.
Compliance Assessment
Acceptability standards such as IPC-A-600 dictate the minimum copper thickness permissible in industrial applications. For instance, class three circuit boards demand a minimum wall plating of twenty microns. Failure to meet this thickness requirement leads to the rejection of the entire production batch.
The physical cross-section remains the final arbiter in quality disputes between board suppliers and assembly plants.