Meaning
The deposition of a conductive metallic layer onto printed circuit board pads provides a solderable surface and protects the underlying copper from oxidation. This pad metallization represents a critical step in the fabrication process, directly determining the quality of the subsequent solder joint. Common finishes include electroless nickel immersion gold, hot air solder leveling, and organic solderability preservatives.
Surface Finish
Selecting the appropriate metallic coating depends on the electrical, mechanical, and shelf-life requirements of the final electronic assembly. Some finishes provide a very flat surface suitable for fine-pitch components, while others offer superior resistance to environmental corrosion. The choice also affects the assembly process, particularly the reflow temperatures and fluxes required to achieve complete solder wetting.
Solderability Performance
Solderability is maintained when the metallic layer remains free of excessive oxides, allowing the molten solder to dissolve the surface coating.
Corrosion Prevention
In harsh environments, the metallization prevents atmospheric moisture and corrosive gases from reaching the underlying copper circuitry. If the metallic barrier is too thin or porous, localized galvanic cells can form, leading to premature joint failure during field operation. Therefore, strict quality control protocols are applied to measure the thickness of the deposited metal layers using X-ray fluorescence or micro-sectioning.