Meaning
Incomplete coalescence between the solder paste and the component sphere during electronic reflow assembly creates a weak, non-homogeneous connection. This defect, termed head in pillow voiding, occurs when the solder ball and paste melt separately but fail to combine into a single joint. The resulting contact conducts electricity temporarily but fails under minimal mechanical or thermal stress.
Identifying this issue is essential for preventing field failures in consumer electronics.
Detection Method
Detection of this joint separation requires advanced three-dimensional x-ray inspection because the defect is hidden beneath the component body. Standard automated optical inspection cannot identify head in pillow voiding due to the line-of-sight obstruction from the chip package. Manual inspection is likewise ineffective for this internal interface.
Functional testing often misses the flaw because the two surfaces are in physical contact.
Thermal Profile
Profile adjustment during the reflow stage represents the primary method for preventing joint separation. Misalignment of the temperature curve can exacerbate head in pillow voiding by causing uneven heating across the board. Engineers modify the soak time to ensure both the paste and the sphere reach the liquidus temperature at the same moment.
Proper thermal management eliminates the premature oxidation of the solder surfaces.
Board Defect
Board warpage during the heating cycle also contributes to this defect. When the laminate bends, it separates the ball from the paste, leading to head in pillow voiding. Restricting board movement through fixture design prevents this separation.