Meaning
Interconnect technology used in advanced semiconductor manufacturing where copper wiring is deposited into etched trenches and vias within a dielectric layer. In high volume fabrication plants, copper dual damascene replaces traditional aluminum subtractive etching to improve electrical conductivity and reduce resistance capacitance delay. The process involves creating two levels of circuitry in a single metallization step, which requires precise chemical mechanical polishing to remove excess metal.
Since copper diffuses easily into silicon, a barrier layer of tantalum or tantalum nitride is deposited before the copper seed. Chinese foundries utilize this method for nodes below 130 nanometers to meet the power and speed requirements of modern integrated circuits.
Fabrication Sequence
Construction of the circuitry begins with the deposition of an interlayer dielectric followed by two separate lithography and etching steps for the vias and the trenches. Instead of etching the metal itself, the manufacturer etches the pattern into the insulating material. Electroplating then fills the resulting cavities with copper.
This specific order characterizes copper dual damascene as an additive process.
Material Limitation
The high mobility of copper ions necessitates the use of robust diffusion barriers to prevent the poisoning of the underlying silicon transistors. Tantalum based alloys provide the necessary seal while maintaining low resistance at the interface. Without these barriers, the integrity of the device would degrade quickly under thermal stress.
Yield Management
Success in the cleanroom depends on the uniformity of the chemical mechanical polishing stage. Overpolishing can lead to dishing where the copper surface sinks below the dielectric level. Such defects increase the risk of electrical failure in the final package.