Meaning
Physical joining of a temperature sensor to a substrate or component to measure thermal profiles during heat-treatment or soldering processes. For surface mount technology profiling, thermocouple attachment is required to ensure that the sensor remains in direct thermal contact with the board during its journey through the reflow oven. The accuracy of the measured temperature depends on the quality of this thermal and physical joint, preventing incorrect readings that could lead to poor solder quality.
Physical Positioning
Location and method of joining are selected to represent the thermal mass of the assembly. For effective thermocouple attachment, the sensor is typically secured using high-temperature tape, conductive epoxy, or solder. The choice of method affects the response time and the reliability of the temperature reading during the profiling run.
Thermal Profile
Accurate profiling depends on the thermocouple remaining attached throughout the heating cycle. If a thermocouple attachment fails during the run, the sensor can lift off the surface, leading to incorrect temperature readings. These false readings can result in incorrect reflow oven settings, which leads to solder defects.
Process Limit
Maximum temperatures and physical stresses constrain the use of specific attachment methods. While high-temperature solder provides the most reliable thermocouple attachment, it cannot be used on boards that will be shipped to customers. Non-destructive attachment methods must therefore be used for production boards.