Meaning
Deformation occurring in metallic alloys under mechanical stress at temperatures above half their absolute melting point represents a primary failure mechanism in electronics. High-power modules are particularly susceptible to solder creep during prolonged operation. This process happens even when the applied stress is below the yield strength of the material.
Plastic Flow
Accumulation of strain over time leads to the gradual change in the shape of the joint. Solder creep is driven by the movement of atoms along grain boundaries and through the crystal lattice. Because electronic devices operate at high temperatures relative to the melting point of solder, this flow is always present during use.
Thermal Cycle
Repeated heating and cooling phases generate the stress that drives the deformation. In each cycle, the solder creep relaxes the stress but leaves behind permanent damage in the microstructure. This damage eventually coalesces into small cracks that grow across the entire joint.
The rate of this progression depends on the dwell time at peak temperature and the ramp rate between extremes.
Fatigue Life
Prediction of the remaining service time requires a detailed understanding of the creep behavior. Engineers use power law models to relate the strain rate to the stress and temperature. By measuring the creep resistance of different alloys, manufacturers can select the best material for a specific thermal environment.