Meaning
Thin metallic layers deposited between copper conductors and insulating materials provide the necessary adhesion to prevent atomic migration in advanced circuits. Modern semiconductor fabrication processes employ a cobalt liner to replace tantalum barriers in order to reduce the thickness of the interconnect wall. This change is necessary because the traditional liner takes up too much volume in the trench at small dimensions.
Diffusion Barrier
Prevention of copper migration into the silicon dioxide or low-k dielectric is essential for maintaining the electrical isolation of the circuit. The cobalt liner creates a stable interface that blocks the movement of metal atoms. It also provides a better surface for the subsequent deposition of the copper seed layer.
Resistance Profile
Reduction in the total resistance of the interconnect is achieved by allowing for a larger volume of copper within the same trench width. Because a cobalt liner is thinner than a tantalum liner, the conductive path for the signal becomes more efficient. Engineers measure the line resistance to verify that the thinner barrier maintains the expected performance gain.
If the deposition process is not perfectly controlled, the cobalt might react with the copper or the dielectric, which increases the resistivity. Maintaining a uniform thickness of only a few angstroms is the primary challenge in high-volume manufacturing.
Reliability Enhancement
Resistance to electromigration is improved when the copper atoms are strongly bonded to the surrounding metal. Utilizing a cobalt liner helps to minimize the formation of voids at the top interface of the line. This leads to a longer mean time to failure for the integrated circuit under high current densities.