Meaning
Restrictions on the percentage of recycled material that can be mixed with virgin resin prevent the cumulative degradation of mechanical properties. Secondary regrind limits specify the maximum allowable ratio of ground-up runners and scrap to new material in a production batch. High-performance polymers often lose physical integrity after multiple heat cycles, making the control of this ratio a safety requirement.
These limits are typically expressed as a percentage, such as a twenty percent regrind to eighty percent virgin mix.
Material Integrity
Thermal history accumulates with every pass through the injection molding machine. As the secondary regrind limits are exceeded, the polymer chains shorten and the material becomes brittle. This change in viscosity alters the filling behavior and makes the process unstable.
Maintaining a consistent ratio ensures that the melt flow index stays within the expected range for the tooling.
Operational Control
Proportional mixers or gravimetric feeders automate the introduction of recycled material into the production stream. If the secondary regrind limits are not strictly enforced, the variation in part weight and dimensions increases. Operators must track the number of times a material has been re-processed to avoid using third-generation or fourth-generation regrind.
Pure virgin material is often required for the first articles in a new production run to establish a baseline.
Regulatory Boundary
Compliance with Chinese national standards for plastic products often depends on the transparent disclosure of recycled content. The secondary regrind limits for food-contact or medical-grade components are often zero to prevent chemical leaching. In industrial applications, the limits are validated through tensile and impact testing of sample bars molded at various regrind levels.
Documentation of the regrind ratio is a core component of the quality management system. Auditors verify the mixing ratios by comparing the warehouse resin issues against the production scrap logs.