Meaning
Release of trapped gases or volatile compounds from materials under high-temperature or vacuum conditions can cause severe contamination and structural voids in electronic assemblies. The occurrence of outgassing is a primary concern in printed circuit board manufacturing and aerospace applications. When materials like epoxy resins or printed solder pastes are heated, moisture and volatile solvents escape.
This phenomenon can compromise vacuum systems or create defects in solder joints.
Physical Mechanism
Thermal energy breaks weak chemical bonds and mobilizes absorbed moisture or volatile organic compounds within the material matrix. As these molecules diffuse to the surface, outgassing occurs, releasing vapor into the surrounding environment. In vacuum applications, this released vapor can condense on sensitive optical lenses or electrical contacts.
In soldering, the rapidly expanding gas becomes trapped in the molten metal, forming voids as the joint solidifies.
Defect Prevention
Controlling the moisture content of circuit board substrates prior to assembly is essential to prevent internal delamination. Uncontrolled outgassing during reflow soldering often causes blowholes in through-hole solder joints and leads to open circuits. Pre-baking the boards at elevated temperatures driving out absorbed moisture is a standard method to minimize this risk.
This simple pre-treatment prevents gas expansion from damaging the internal layers of multi-layer boards.
Process Control
Standardized testing protocols and material selection criteria ensure that only low-volatility components are used in high-reliability applications. For aerospace and cleanroom electronics, materials are evaluated according to ASTM E595, which measures total mass loss and collected volatile condensable material. Specifying materials with low outgassing characteristics prevents the degradation of delicate systems over time.
In the commercial factory, keeping solder paste stored correctly and maintaining optimized reflow profiles ensures that solvents evaporate before the solder becomes liquid. This procedural control eliminates gas entrapment and secures the mechanical integrity of the solder joints under demanding operating conditions.