Meaning
An intermetallic compound of copper and tin forms at the interface between copper pads and solder alloys, characterized by high copper concentration and low ductility. This copper-rich phase, representing tricopper stannide, lies directly adjacent to the copper substrate. It typically grows beneath the more tin-rich phase during thermal aging.
Controlling this compound is essential because its presence alters the mechanical behavior of the solder joint.
Metallurgical Evolution
Solid-state diffusion of copper atoms into the adjacent solder layer governs the growth of intermetallic phases over time. While hexacoppertin pentastannide forms during reflow, tricopper stannide grows gradually during high-temperature storage or operation. This phase arises when copper atoms diffuse into the existing hexacoppertin pentastannide layer, transforming it into a more copper-rich state.
This continuous evolution creates a layered structure at the solder interface.
Reliability Concern
Differential stresses accumulate at the boundary between different intermetallic phases due to mismatched mechanical properties. Because tricopper stannide is extremely brittle, it acts as a primary site for crack initiation under mechanical tension or drop tests. The interface between the two intermetallic layers is particularly vulnerable to delamination.
If this zone grows excessively, the joint suffers from a significant reduction in fracture toughness.
Process Mitigation
Limiting the thermal budget of the electronic assembly during manufacturing and subsequent operation prevents excessive growth of brittle intermetallics. Applying a nickel diffusion barrier between the copper pad and the solder prevents the formation of tricopper stannide by blocking the migration of copper atoms. This design choice is common in automotive and aerospace electronics where long-term thermal stability is mandatory.
In addition, optimizing the reflow profile and using lower operating temperatures during device service helps to slow down solid-state diffusion. These preventive actions preserve the structural integrity of the electronic connections and extend the operational lifetime of the system.