Meaning
Microscopic cavities that form at the boundary between a solder alloy and a substrate pad during the reflow process. These interfacial voids are often located between the intermetallic layer and the base copper or nickel finish. Their presence reduces the effective contact area of the joint.
Structural Integrity
Internal stress within the joint causes the mismatch in expansion rates around the interfacial voids to put pressure on these empty spaces. High densities of these small holes create a weakened plane where cracks can initiate and grow. An assembly with such defects is prone to sudden failure during drop tests or vibration.
This vulnerability makes the voids a focus of reliability screening.
Gas Evolution
Chemical reactions between the flux and surface oxides release trapped gases that cannot escape before the solder solidifies. In some cases, impurities in the plating bath lead to the formation of organic residues that outgas and cause interfacial voids during reflow. Adjusting the temperature profile can provide more time for these gases to rise to the surface.
This technique requires careful balancing of the time and temperature settings.
Thermal Fatigue
Repeated heating and cooling of the electronics during operation causes the cavities to expand and coalesce. Over thousands of cycles, the small gaps join together to form a continuous separation that eventually breaks the electrical connection. Manufacturers use cross sectional imaging to monitor the size and quantity of interfacial voids in sample lots.
Controlling the plating quality and flux chemistry is the best way to prevent their formation.