Meaning
Surface corrosion occurs when metallic support structures in semiconductor packages react with atmospheric oxygen during high-temperature assembly stages. The presence of copper leadframe oxidation creates a weak layer that prevents strong adhesion between the molding compound and the metal frame. This phenomenon typically happens during the die attach cure or the wire bonding processes where parts are exposed to ambient air while hot.
Oxide Layering
Thermal energy accelerates the formation of cuprous and cupric oxide layers on the exposed metal surfaces. While a thin layer of copper leadframe oxidation might seem harmless, it thickens rapidly at temperatures exceeding 200 degrees Celsius. These layers vary in color from light brown to black depending on the thickness and the chemical composition of the oxide.
Delamination Risk
Separation of the package materials at the leadframe interface results in catastrophic failure under thermal stress. Because copper leadframe oxidation lacks the structural strength of the base metal, it acts as a fracture point within the plastic body. Stress concentration at these points causes cracks to propagate through the encapsulation during reflow.
This allows moisture to enter and further degrade the internal components. Reliability tests often detect this failure mode after the device undergoes rapid temperature cycling or highly accelerated stress testing.
Reduction Atmosphere
Controlling the environment with nitrogen or forming gas prevents the reaction from occurring during the heating cycles. When the assembly line maintains a low oxygen concentration, copper leadframe oxidation is suppressed and the bond strength is preserved. Plasma cleaning is often required before molding to remove any residual oxides that formed earlier in the process.