Meaning
Structural point defects within a crystalline material occur when an atom is missing from its regular position in the crystal grid. In solder joint metallurgy, lattice vacancies act as the primary vehicle for mass transport, allowing copper and tin atoms to migrate through the intermetallic layers during both thermal aging and electrical operation. The boundary of this phenomenon is determined by the activation energy required for an adjacent atom to jump into an empty site, which varies with the local alloy composition.
These defects are generated during the rapid cooling phase of the reflow soldering process and are frozen into the solid state.
Atomic Diffusion
Atomic migration rates rise significantly when the concentration of point defects increases due to thermal or electrical stress. As atoms move to occupy adjacent lattice vacancies, they create new empty sites behind them, establishing a continuous flux of empty spaces in the opposite direction. This mechanism governs the growth of the brittle intermetallic compound layer at the solder-to-substrate boundary.
Electro-migration occurs when high current densities force these defects to accumulate at the cathode.
Interface Voiding
Coalescence of migrating empty spaces at the boundary of different metallic phases eventually forms macroscopic defects known as Kirkendall voids. These microvoids reduce the contact area of the solder joint, lowering its mechanical shear strength and creating localized electrical resistance. When printed circuit boards undergo drop testing, joints with high densities of these defects fail through brittle interfacial fracture.
The failure occurs without warning, making it a major concern for portable electronics manufacturers.
Temperature Sensitivity
Thermal energy accelerates the generation and movement of these defects. At temperatures above eighty percent of the alloy’s melting point in Kelvin, the equilibrium concentration of lattice vacancies increases exponentially, driving rapid structural degradation. Controlling the cooling rate after reflow represents the primary manufacturing method for minimizing initial defect densities in the solder matrix.