Meaning
Protects exposed copper tracks on printed circuit boards from oxidation by coating them with a molten solder layer during surface finishing operations. Circuit board fabricators implement hasl finish treatments to establish solderable pads before component placement and assembly. The process involves submerging panel boards into molten solder alloy and blasting air knives across the board surface to remove excess metal.
Operational limits stem from surface thickness variation, making this finish unsuitable for fine-pitch surface-mount components and micro-BGA packages.
Thermal Process
Panels enter an automated process line where chemical flux cleans exposed copper surfaces. Cleaned panels descend into a bath of liquid solder maintained above liquidus temperatures. Air knives blast high-pressure hot air against both panel faces as boards exit the molten bath, applying a hasl finish while clearing through-holes and leveling trace pads.
Rapid cooling follows, solidifying the metallic layer.
Surface Topography
Air knife pressure dynamics create a characteristic domed surface profile across rectangular landing pads. Thicker solder deposits accumulate in pad centers while pad edges remain thinner. High-density surface-mount devices experience placement instability on uneven pad domes, increasing bridging risks during reflow.
Surface roughness limits board designs requiring planar land grids.
Thickness Limit
Coating thickness ranges between one micron and forty microns across a single circuit panel. Excessively thin regions risk copper exposure during extended storage, while overly thick areas cause component tilt. Process controls adjust air pressure and withdrawal speed to constrain thickness variation.