Meaning
Plating geometry parameters measure the continuous layer of electrodeposited copper extending from a hole wall onto the surface foil of a printed circuit board. Requirements for copper wrap thickness ensure that thermal stress during soldering does not cause corner cracks or interface separations at blind or buried microvias. Specifications published by IPC and Chinese national standard GB/T 31473 mandate minimum wrap dimensions based on target reliability classes.
Chinese factory quality control auditors test this dimension on cross-sectioned coupons during batch validation for industrial export shipments.
Thermal Resistance
Substrate expansion during reflow soldering exerts tensile force directly on microvia knees. Adequate copper wrap thickness prevents mechanical fatigue by distributing mechanical stress evenly across the capture pad interface. Microvias with inadequate wrap dimensions fail prematurely under cyclic thermal shock testing.
Deposition Process
Electroplating baths require precise current density distribution and chemical additive control to build uniform surface copper. Variations in bath circulation directly affect copper wrap thickness, creating thin spots at knee transitions if fluid agitation is insufficient. Chemical monitoring protocols enforced by the State Administration for Market Regulation maintain bath stability across production shifts.
Compliance Verification
Metallographic microsectioning provides direct measurement of surface-to-hole copper transitions under optical microscopy. Buyers verifying copper wrap thickness inspect microsection reports to confirm compliance with purchase order specifications. Defective wrap thickness invalidates supplier conformity certificates and grounds warranty claims under Chinese commercial law.