Meaning
Steel wire rods specifically manufactured to withstand extreme plastic deformation during high-speed forming operations are categorized under a dedicated metallurgy grade. Such material, commonly called cold heading wire, undergoes specialized heat treatment to ensure a uniform microstructure. Fastener manufacturers use this stock to form bolts, rivets, and screws without crack formation.
Deformation Capacity
Superior plastic flow properties are required to allow the metal to occupy the die cavity fully under compressive force. The chemical composition of cold heading wire is restricted to low carbon and controlled manganese levels to limit work hardening during the stamping process. Spheroidizing annealing is applied to the wire to maximize ductility.
This thermal process ensures the metal remains malleable during rapid industrial upsetting. Without this specific heat treatment, the raw material would fracture immediately when subjected to high-speed die pressure.
Surface Finish
Surface defects like seams or scratches can intensify stresses and trigger microcracks during severe cold forming. Producers of cold heading wire apply strict drawing practices to maintain a smooth surface. Any superficial flaw greater than a specified depth will cause the wire to be rejected.
Quality Evaluation
Mechanical testing determines the suitability of the wire stock before it is fed into cold headers. A compression test is conducted on a sample of cold heading wire to measure its resistance to fracturing under load. This test ensures that the incoming raw material possesses the mechanical integrity required for downstream cold forming.