Meaning
Solderability evaluation quantifies the wetting force between molten solder and a test component surface over time. Through the wetting balance test, engineers obtain a precise mathematical curve representing the speed and strength of the solder adhesion. This measurement confirms board solderability.
Measurement Principle
Adhesion forces are calculated by measuring the vertical forces exerted on a sample suspended from a sensitive balance. When the component is immersed in the molten metal, buoyancy initially pushes it upward, creating a negative force. As the solder wets the surface, the force turns positive, indicating successful wetting.
Execution Sequence
The test begins by applying a standardized flux to the component lead before clamping it to the transducer arm of the machine. The lead is then dipped into a bath of molten solder at a controlled speed and depth for a specified duration, usually five seconds. Continuous force measurements are recorded by the instrument sensor and plotted on a graph against elapsed time.
This graph allows technicians to calculate the precise moment when wetting begins and reaches its maximum force.
Acceptance Criterion
Acceptable components must reach a specified positive force value within two seconds of immersion to pass the evaluation. Failure to meet this speed limit indicates surface oxidation or contamination, requiring the batch to be rejected. This screening ensures reliable high-speed automated soldering.